User's Guide
According to science hot steam in a enclosed setting for a minimum of minutes of constant treatment can kill bacteria, viruses and mold…hence SANITIZE. With your BVOS producing hot steam at 212˚ Fahrenheit and having two cycles to choose from between a 3 minute and a 10 minute one your BVOS is way over the threshold to fully sanitize your emotional vessel.
Apart from this user’s guide also before using BVOS read and follow the content within the Health/Environment Consumer Information menu tab that is located at the bottom front page of this website.
Dear BVOS new owner thank you for choosing to own a BVOS to sanitize your sanitize safe reusable drinking device and its sanitize safe attachments (top/lid, straw) via the Organic Process of the Power of Hot Steam.
Model Number: DDSM1US
What is in the box and explanation of use of its attachments:
- BVOS unit consists of a upper and a lower part.
- Attachment with the wide inner circle is for a bottle with a sanitize safe bottle rim of a 2 or a 3 inch diameter.
- Attachment with the small inner circle is for a bottle with a sanitize safe bottle rim of a 1 ½ or a 4 inch diameter.
- Silicone attachment with the X entry next to the center straw holder is for a sanitize safe top/lid with a fold-up mouthpiece and a sanitize safe straw or either or and its sanitize safe bottle or no bottle.
- Silicone attachment with only the center straw holder is for only a sanitize safe top/lid and a sanitize safe straw or either or but with no bottle.
- Detachable electric cord.
Warnings and Important safety instructions:
- This product gets hot and ejects hot steam. Obey the: “Caution, Hot Surface, Do Not Touch” signs that are placed on the 4 sides of your BVOS.
- Before use remove any non-sanitizing parts from your bottle and/or attachments not limited to rubber sealant bands and such.
- This product is not intended to be operated by children nor to be near children while the product is in use.
- This product is not intended to be operated by a person with a hindering ability not to safely operate this product nor to be near this product while the product is in use.
- Once the process is completed due to its produced hot steam do not retrieve your reusable bottle/attachments. Fully wait until your BVOS/bottle/attachments are cold to the touch.
- Due to its hot steam while your BVOS is in process no flammable materials, person(s), pet(s) or other household appliances should be close to this unit. Unplug the electrical cord from the power supply when not in use.
- Do not operate your BVOS without the necessary soft water in its base.
- To avoid the risk of an electric shock do not immerse your BVOS nor its electric cord in water or other liquids.
- Only use your BVOS for its intended purpose.
- Always use fresh soft water when starting a new use and discard any leftover soft water from its previous use.
- Do not let your BVOS nor its electric cord come in contact with any hot surfaces.
- Always set your BVOS on a flat surface and make sure all its surroundings including its underneath and its above area are free and clear so that nothing will come in contact with its escaping hot steam.
- Do not operate your BVOS if the electric cord or other parts have become damaged.
- While your BVOS is in use do not leave it unattended and keep a safe distance in order not to come in contact with its escaping hot steam.
- In order to avoid a possible overload do not operate your BVOS in the same circuit as other high volts/watts appliances.
- Insert your BVOS electric cord directly into the power supply (do not connect its electric cord to any extension cord).
- Your BVOS electric cord is detachable. Only use it with your BVOS and never use an electric cord that is not authorized by BVOS.
- While in use/storage do not place your BVOS in a harsh environment.
- Your BVOS is intended for indoor use only.
- Do not take apart or disassemble your BVOS.
- While in use do not allow the electric cord to hang from a countertop corner or anywhere where someone or a pet can mistakenly pull on it and create an accident.
- Always set your BVOS and its electric cord in a dry setting.
Instructions on how to place your BVOS attachments: First and foremost, determine that your reusable drinking device along with its attachments such as its top/lid, straw are sanitized safe via hot steam. If not change it to one that is sanitize safe via hot steam before continuing with your BVOS.
1st pour 100ml of soft water in the base (100ml and Max fill line indicators are printed in the base). 2nd place the chosen BVOS attachment(s), your drinking device and its attachments (top/lid, straw) in/on your BVOS (for any top/lid when placing it in the base make sure the top/lid leaves room for the hot steam to escape and shoot up into the bottle and so forth) and 3rd connect the electric cord directly to the power supply.
Unlocking/detaching and locking/attaching your BVOS: (front of BVOS facing you) Slightly twist the upper part towards the right to lock/attach and slightly twist towards the left to unlock/detach.
For a 1 ½ or a 4 or just over a 4 inch diameter sanitize safe rim bottle use the attachment with the smaller inner circle and set it on the upper part of your BVOS followed by inserting/setting the bottle in/on the attachment. If the bottle rim is just over 4 inches in diameter you will need to place the smaller inner circle attachment in a upside down position and then set your bottle on the attachment’s surface.
For a 2 or a 3 inch or just over diameter sanitize safe rim bottle use the attachment with the larger inner circle and set it on the upper part of your BVOS then insert the bottle through the attachment. The bottle within the attachment should come to a stop at its end rim or its neck section exposing the bottle’s rim ridges into the base. If the attachment circle is too large and it does not hold the bottle in place by its rim/neck area unlock/detach the upper part of your BVOS place the smaller inner circle attachment in a upside-down position and sit it on the stands that are built on the sides of the base the attachment will then properly sit above the already placed top/lid. Relock/reattach the upper part of your BVOS and reinstall the larger inner circle attachment on the upper part of your BVOS. Once the bottle is reinstalled its rim section will rest on the smaller inner circle attachment that was placed in the base and will then be stabilized in its position rendering it ready to be sanitized.
If selecting a silicone attachment:
To place a silicone attachment the upper part of your BVOS needs to be unlocked/detached then place the silicone attachment on the lower part of your BVOS then relock/reattach the upper part.
The silicone attachment with an X entry next to the straw holder section is designed to sanitize a sanitize safe top/lid with a fold-up mouthpiece and a sanitize safe straw or either or with or without a sanitize safe bottle. Place the fold-up mouthpiece through the X entry from its bottom and insert the straw in the straw holder. The straw according to its length can be pushed further from the attachment down towards the base as long as it does not make contact with the bottom of the base and if it needs it in order for the bottle to be able to properly fit over it.
The silicone attachment with only a straw holder is designed to sanitize only a sanitize safe top/lid and its sanitize safe straw or either or but with no bottle. Place the top/lid in the base followed by inserting the straw in its straw holder.
Drinking bottles with a handle:
Align the handle along with the front dip area of your BVOS. If the handle collides with the dip area a step will need to be created in order to create room between the dip and your bottle’s handle. The step will be achieved by using the attachment with the smaller inner circle and placing it in a upside down position on the upper part of your BVOS. The extra room is now created and ready to reinstall your bottle on the attachment.
Prior and after use soft water rinse your bottle and its attachments.
Power on instructions:
To power on your BVOS gently press and hold the power symbol for 3 seconds. Once power is on it will be at the 1st cycle which is a green color power symbol and it will give a 3 minute cycle. If gently pressed again it will be at the 2nd cycle which is a red color power symbol and it will give a 10 minute cycle.
Power off instructions:
To power off your BVOS 1) allow the chosen cycle to be completed, 2) at any time within a cycle gently repress and hold the power symbol for another 3 seconds or 3) your BVOS will automatically shut off if all the previously placed soft water has been turned into steam.
Specifications of your BVOS:
BVOS description: Drinking Device Sanitizer |
Watts power: 330w |
Volts: 120v |
Hertz: 60Hz |
Temperature range of both cycles: 100 ˚ Celsius (212˚ Fahrenheit) |
Dimensions: Height 18.5cm, 360 diameter 177.7cm |
Weight of BVOS w/ attachments: 1.7 lbs. |
Soft water needed for operating your BVOS: Per cycle: Minimum of 100ml of soft water. No more soft water above the Max indication fill line. |
Operation times: 1st option is a 3 minute cycle, 2nd option is a 10 minute cycle. |
Materials: Upper/Lower part & its 2 inner circle attachments: PP (Polypropylene) T30S 2 straw holder attachments: Silicone
|
Application for use: Dwelling/office/indoor event |
Care instructions for your BVOS:
- Clean your BVOS lower part with a soft water damp soft cloth before and after use. Due to this unit’s (lower part) electric functions do not expose it to any running water such as a kitchen faucet or a dishwasher. The upper part of your BVOS as well as its attachments are ok in regard to a rinse.
- Prior and after use soft water rinse your bottle and its attachments as well as give it a final manual clean in order to wash away any residuals that were left after the sanitize process has ended.
- Use soft water in order to avoid dry water stains in your BVOS and in/on your drinking bottle and its attachments.
Refund and returns:
Returns are accepted only from the original buyer for a full monetary refund of the product(s) paid amount minus a 30% restocking/disposal and the shipping fee. The unit must be received no later than 30 days from the purchase date along with proof of purchase. The unit must be in its original condition/packaging any alterations to the product or its attachments such as not limited to marks, cracks will result in a denial of return.
Customize/final orders are not eligible for a return.
Customer is responsible for any return to Arturios LLC & return to customer shipping fee.
Company mailing address: Arturios LLC 12913 Harbor Blvd Ste Q-3 #285 Garden Grove California 92840
Limited Warranty:
Arturios LLC grants any BVOS unit with a limited 1 year warranty that starts from the date of purchase and is issued only to the original buyer. Once the unit is received by Arturios LLC it will be shipped to the manufacturer which is located in the country of China where the unit will be repaired. Note: time frame from receiving the unit until completion of repair cannot be stated.
Warranty Limitations:
Any alterations, misuse and/or negligence from any party including other vendors that are not BVOS By Virtue of Steam will void the warranty. The warranty does not cover any normal wear and tear and it does not cover any Acts of God not limited to hurricanes, fires, floods, earthquakes. Proof of purchase along with proof of the original buyer will be requested. Read and fully understand the user’s guide for this product before its use.
Feel free to contact us via our website’s contact menu tab in regards to any questions, initiate a Refund/Return.